PRINT
Spine from C1 to Sacrum with vertebral arteries
CHF 325.30
LD9315
Orientation neutral Model Type intact Dimensions Overall length: 780mm Material Solid foam Low Density. Disk: soft flexible foam Delivery Delivery time upon request
PRINT
Lumbar Spine from T10 to L5 with radiopaque coating
CHF 227.95
LDPR1536.9
Orientation neutral Model Type intact Dimensions Overall length: 298mm Material Spine T10-L5 cortical low density / open cell cancellous bone. Disk: soft flexible foam Delivery Delivery time upon request
PRINT
Large Spine holder for large lumbar Spine L1-Sacrum
CHF 235.70
PR1232.30
Orientation neutral Model Type intact Dimensions 294 x 204 x 170mm Material Various materials Delivery Ready to ship within 15 working days
PRINT
Lumbar Spine bed posterior access. Holds spine models from L1 - L5 with Sacrum. Spine model is NOT included in delivery.
CHF 241.70
PR1329
Orientation neutral Model Type intact Dimensions 410 x 280 x 240mm Material PE Solid foam Delivery Ready to ship within 30 working days
PRINT
Left lower Leg with large 4-part foot, talus, calcaneus, forefoot sections and fractured tibia, fibula assembled with rubber ligaments incl. tendons, vessels and nerves. Covered with 120° soft tissue with intermuscular fascia
CHF 242.90
PR0903.02.1
Orientation left Model Type fractured Dimensions Length: 280mm, Malleolar width: 61mm, Lower Leg length: 451mm Material Tibia: Cortical / hard cancellous bone Fibula and 4-part Foot: Solid foam Delivery Ready to ship within 15 working days
PRINT
Spine bed for posterior access. Holds spine models from C1 - L5 with Sacrum with slight skoliosis. Spine model is NOT included in delivery.
CHF 248.70
PR1229.10
Orientation neutral Model Type intact Dimensions 900 x 200 x 150mm Material PE Solid foam Delivery Ready to ship within 30 working days
PRINT
Large Spine holder including navigations pin for large lumbar Spine L1-Sacrum
CHF 259.30
PR1608.30
Orientation neutral Model Type intact Dimensions Length: 294mm. Width: 204mm. Height: 170mm Material Various materials Delivery Ready to ship within 25 working days
PRINT
Spine bed for posterior access. Holds spine models from C1 - L5 with Sacrum. Spine model is NOT included in delivery.
CHF 261.75
PR1229
Orientation neutral Model Type intact Dimensions 900 x 200 x 150mm Material PE Solid foam Delivery Ready to ship within 30 working days
PRINT
Lumbar Spine section from T10-L5 and Sacrum with radiopaque coating
CHF 265.20
LDPR0770.9
Orientation neutral Model Type intact Dimensions Length: 390mm Material Sacrum: Solid foam low density, Vertebrae T10-L5: Cortical low density / open cell cancellous bone, Disk: soft flexible foam Delivery Delivery time upon request
PRINT
Right large Femur with 3-part reverse intertrochanteric fracture. Soft tissue with intermuscular fascia and window, additional proximal holding block and distal wooden holder for clamping with the Bone clamp
CHF 282.20
LSH2251.01.1
Orientation right Model Type fractured AO/OTA FX Class 31A3.3 Dimensions Femur Length: 465mm, Condylar width: 86mm, Neck angle: 135°. Anteversion: 15°, Head diameter: 48mm, Canal diameter: 12mm Material Cortical hard density / soft cancellous bone structure Delivery Ready to ship within 15 working days
PRINT
Entire Spine bed for posterior access. Holds spine models from C1 - L5 with Odciput and Sacrum. Spine model is NOT included in delivery.
CHF 284.00
PR1237
Orientation neutral Model Type intact Dimensions 950 x 200 x 180mm Material PE Solid foam Delivery Ready to ship within 30 working days
PRINT
Entire Spine from T7 to L5 with Sacrum and radiopaque coating
CHF 300.90
LSS9386.9
Orientation neutral Model Type intact Dimensions Overall Length: mm Material Vertebrae and Sacrum Solid foam LSS cancellous bone density, Disk: soft flexible foam Delivery Delivery time upon request
PRINT
Lumbar Spine flatbed for posterior access. Holds spine models from T2 - L5 with Sacrum and Pelvis. Spine model is NOT included in delivery.
CHF 319.65
PR1329.30
Orientation neutral Model Type intact Dimensions 750 x 290 x 240 mm Material PE Solid foam Delivery Ready to ship within 30 working days
PRINT
Lumbar Spine bed for posterior acces. Holds spine models from T2 - L5 with Sacrum and Pelvis. Spine model is NOT included in delivery.
CHF 319.65
PR1329.20
Orientation neutral Model Type intact Dimensions 750 x 290 x 240 mm Material PE Solid foam Delivery Ready to ship within 30 working days
PRINT
Spine from C1 to Sacrum with vertebral and arteries
CHF 325.30
LSS9315
Orientation neutral Model Type intact Dimensions Overall length: 780mm Material Vertebrae and Sacrum Solid foam LSS cancellous bone density, Disk: soft flexible foam, Arteries: PVC hose Delivery Delivery time upon request
PRINT
Spine from T1 to Sacrum with bending rod
CHF 350.45
LD9320.7
Orientation neutral Model Type intact Dimensions Overall length: 660mm Material Solid foam Low Density. Disk: soft flexible foam Delivery Delivery time upon request
PRINT
Spine from T1-L5 with Sacrum and flex rod
CHF 350.45
LSS9320.7
Orientation neutral Model Type intact Dimensions Overall length: 660 mm Material Solid foam LSS material. Disk: soft flexible foam Delivery Delivery time upon request
PRINT
Spine from C1 to Sacrum with vertebral arteries and bending rod
CHF 353.80
LD9315.7
Orientation neutral Model Type intact Dimensions Overall length: 780mm Material Solid foam Low Density. Disk: soft flexible foam Delivery Delivery time upon request